Phi Mainboard 5LC 3D printer controller launches for $149

3D printing fans PC ready for the launch of the brand new open supply ESP32 3D printer controller outfitted with wi-fi and ethernet connectivity and taking the type of the beforehand introduced Phi Mainboard 5LC board created by Likha Labs. Will be happy to know that the {hardware} is now accessible to buy from the Crowd Supply web site and is priced at simply $149 with transport anticipated to happen throughout July 2022. Free transport is obtainable all through the United States and worldwide transport is obtainable for an additional $14.

3D printer controller

“Phi Mainboard 5LC is a 3D printer controller with a focus on network connectivity. In addition to all the things that other controller boards can do, Phi provides a web interface that you can use to interact with your printer over the local network. With Phi, you no longer need a separate single-board computer (like a Raspberry Pi), which saves you money, simplifies setup, and spares you from long start-up times. While Phi’s feature set is geared toward 3D printers, it can also be used to drive other digital-fabrication equipment, such as CNC machines.”

“Powering Phi are two processors: an ESP32-S3-WROOM module and a SAM E51 microcontroller. The former handles networking, SD storage, USB communication, and displays; the latter handles kinematics, stepping, digital and analog I/O, and other realtime controls. This delegation of roles ensures that motion control and other time-sensitive operations do not get bogged down by networking. Whether your network is wired or wireless, Phi has you covered. You might start out using your printer over Wi-Fi, then decide to run cable at some point in the future. Or vice-versa!”

“Phi’s web interface, Duet Web Control, allows you to upload G-code files, configure settings, start jobs, control the device, and monitor prints. It even adapts to various screen sizes, so you can use it from a PC, a tablet, or a smartphone. Phi runs RepRapFirmware, which has a huge legacy in the 3D-printing world and is credited with introducing numerous advancements. It supports Cartesian, delta, CoreXY, polar, and most other kinematics. More importantly, you can configure RepRapFirmware without having to rebuild it. Most settings in the firmware, especially those related to kinematics, are configured using G-Code, so you can even make changes on the fly!”

Source : Crowd Supply

Filed Under: Gadgets News

Latest Geeky Gadgets Deals

Disclosure: Some of our articles embrace affiliate hyperlinks. If you purchase one thing by way of one in all these hyperlinks, Geeky Gadgets might earn an affiliate fee. Learn extra.